[Bristuff-users] "Cause 34" on free channel

[Olivier]

2008/5/15 Michiel van Baak <michiel at vanbaak.info>:

> On 16:30, Thu 15 May 08, Olivier wrote:
> > Michiel,
> >
> > 1. How do you check a telco line has energy saving turned on or off ?
>
> As far as I know:
> Leave the line idle for like 15 minutes. If the error shows up after
> that: Bingo.
> But other than that the only way to find out is bug your telco.
>

Just to be 100% sure we're talking of the same thing, would you say those
lines have energy savings turned on ?
(those ports come from the same board, from a setup causing "cause 34"
errors. As you can see, at the moment I typed the command, port 1 was unused
and port 2 was used)

cat /proc/zaptel/*
Span 1: ztqoz/1/1 "quadBRI PCI ISDN Card 1 Span 1 [TE] (cardID 0) Layer 1
DEACTIVATED (F3)" AMI/CCS

           1 ztqoz1/1/1 Clear (In use)
           2 ztqoz1/1/2 Clear (In use)
           3 ztqoz1/1/3 HDLCFCS (In use)
Span 2: ztqoz/1/2 "quadBRI PCI ISDN Card 1 Span 2 [TE] (cardID 0) Layer 1
ACTIVATED (F7)" AMI/CCS

           4 ztqoz1/2/1 Clear (In use)
           5 ztqoz1/2/2 Clear (In use)
           6 ztqoz1/2/3 HDLCFCS (In use)
...


If positive (if energy saving mode is on), then allow me to say it's strange
to link errors and energy saving mode : I've got alternate installations
with, I think, the same set of settings and I don't get a single "cause 34".
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.three-dimensional.net/pipermail/bristuff-users/attachments/20080516/56fe92e3/attachment-0001.htm