[Bristuff-users] "Cause 34" on free channel

[Steve Davies]

Oh, which bristuff and which Zaptel version? I did not see that detail
in any of your previous posts.

Steve

2008/5/7 Steve Davies <davies147 at gmail.com>:
> Hi, some thoughts/questions...
>
>  Are you compiling with MMX or SSE extensions enabled for Echo
>  Cancelling in Zaptel? I remember having very strange behaviour when I
>  tried this about a year ago. If you are, then perhaps try reverting to
>  the default settings.
>
>  Do you change any settings at-all from the default Zaptel+Bristuff
>  during the compile?
>
>  Can you change your ISDN signalling to PTP?
>
>  Is anything else connected to the ISDN circuit except the Asterisk box?
>
>  Cheers,
>
> Steve
>
>  2008/5/6 Gunnar Schaller <linux at nowin.de>:
>
>
> > As requested again my problem. See also my previous postings:
>  >
>  > http://lists.three-dimensional.net/pipermail/bristuff-users/2008-February/000018.html
>  >  http://lists.three-dimensional.net/pipermail/bristuff-users/2008-February/000019.html
>  >  4-port HFC (Junghanns quadbri). Mostly everything works good and I can
>  >  dial in and out. But sometimes I get "cause 34 - Circuit/channel
>  >  congestion" on dialing out. Definitely there is a free B-channel...
>  >  I see nothing with "pri debug", so there must be a Asterisk-internal
>  >  variable telling Asterisk all B-channels are in use on this span.
>  >  But I can dial in on this span from the outside. And AFTER dialing in
>  >  it is also possible to dial out again. Another solution is to restart
>  >  Asterisk.
>  >  I'm willing to try everything to solve this problem. So please bomb me
>  >  with hints :-)
>  >
>  >
>  >
>  >  Thanks,
>  >  Gunnar Schaller
>  >