[Bristuff-users] Patch for BRIstuff 0.4.0-RC3b to support snom CallerID update

[Philipp Walker]

Hi all,

BRIstuff 0.4.0-RC3b (and possibly in earlier versions, too), all the code 
necessary to update the callerid on snom phones after an attended transfer  
(using "message/sipfrag"; as available in BRIstuff 0.3.0-PRE-1y-p, improved 
in 0.3.0-PRE-1y-r) is there, but it's commented out, unfortunately.

The attached patch (121-sip_changes.diff.patch) removes the comments from the 
few relevant lines in file patches/asterisk/121-sip_changes.diff , 
121-sip_changes.diff is the patched version from BRIstuff 0.4.0-RC3b.
Additionally, I've changed the two lines so that both, caller id name and 
number are shown. This change might also be interresting for BRIstuff 0.3 / 
Asterisk 1.2.

The patch is somewhat tested with snom 320s firmware version 7.1.33. I'll see 
that I can also test the BRIstuff 0.3 / Asterisk 1.2 version of it with snom 
320s and 360s during the next days/weeks.
Any chance of getting this change into BRIstuff 0.4? (Who do I have to contact 
to request this?)

Best regards,
Philipp

-- 
Philipp Walker
Binatec AG
Ingenieurbüro für Nachrichten- und Informationstechnik
Q4 Altdorf Ost
Hellgasse 23 / Postfach
6460 Altdorf

philipp.walker at binatec.ch
www.binatec.ch
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 121-sip_changes.diff.patch
Type: text/x-diff
Size: 1691 bytes
Desc: not available
Url : http://lists.three-dimensional.net/pipermail/bristuff-users/attachments/20080707/ce98a244/attachment-0001.patch 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 121-sip_changes.diff
Type: text/x-diff
Size: 31236 bytes
Desc: not available
Url : http://lists.three-dimensional.net/pipermail/bristuff-users/attachments/20080707/ce98a244/attachment-0001.diff