[Bristuff-users] "Cause 34" on free channel

[Gunnar Schaller]

Hello,
Some updates to my issue. In the case I can't dial out a "zap show
channel xx" shows some confusing things. First there is a Caller ID.
Normally there is no Callerid if the channel is not in use.
Second "PRI flags" shows "Call" (this is normally blank if the channel
is not in use). So it seems to me Asterisk did not hang up the last
call correctly. Any variable tells Asterisk the channel is in use and
so it is not available to make a new call. As I wrote before I can
dial in on that channel(s), but not dial out. After a restart it works
again and I can dial out.
So it's pretty clear there is a Asterisk problem. Is anyone out there
with some more information or deeper Asterisk knowledge? Tzafrir?
I will try to have a look to chan_zap tomorrow.

Regards,
Gunnar Schaller



*CLI> zap show channel 10
Channel: 10
File Descriptor: 29
Span: 4
Extension:
Dialing: no
Context: extern-if03
Caller ID: 0441234567
Calling TON: 1
Caller ID name:
Destroy: 0
InAlarm: 0
Signalling Type: PRI Signalling
Radio: 0
Owner: <None>
Real: <None>
Callwait: <None>
Threeway: <None>
Confno: -1
Propagated Conference: -1
Real in conference: 0
DSP: no
Relax DTMF: no
Dialing/CallwaitCAS: 0/0
Default law: alaw
Fax Handled: no
Pulse phone: no
Echo Cancellation: 128 taps unless TDM bridged, currently OFF
PRI Flags: Call
PRI Logical Span: Implicit
Hookstate (FXS only): Onhook